Sharp MX-C507P Service Manual page 194

Action
Step 15
Reseat the motor cable, and then check the motor for misalignment
and damage.
Is the motor properly installed and free of damage?
Step 16
Reinstall or replace the motor. See
pass‑through) removal" on page
Does the problem remain?
Step 17
Perform a print test.
Does the problem remain?
Sensors (tray [x] trailing edge and pass-through): Paper arrived too late service check
Action
Step 1
a
From the home screen, touch Settings > Device > Preferences.
b
Check if the paper size matches the size set on the tray guides.
Does the paper size match the size set on the tray?
Step 2
Change the paper size or adjust the size setting in the tray.
Does the problem remain?
Step 3
Check if the paper size matches the size set on the tray guides.
Does the paper size match the size set on the tray?
Step 4
Replace the paper or change the paper size setting in the tray.
Does the problem remain?
Step 5
Check the paper tray for overfilling.
Is the paper tray overfilled?
Step 6
Remove the excess paper from the tray.
Does the problem remain?
"Motor (550-sheet tray
416.
Diagnostics and troubleshooting
160
Yes
Go to step 17.
Go to step 17.
Contact the next
level of support.
Yes
Go to step 3.
Go to step 3.
Go to step 5.
Go to step 5.
Go to step 6.
Go to step 7.
5028
No
Go to step 16.
The problem is
solved.
The problem is
solved.
No
Go to step 2.
The problem is
solved.
Go to step 4.
The problem is
solved.
Go to step 7.
The problem is
solved.