Using Ricoh-Script2 With Windows; Using Ricoh-Script2 With Windows 95/98/Me; Printer Properties Tabs And Their Settings - Ricoh SCRIPT2 Setup Manual

1. Using RICOH-SCRIPT2 with

Using RICOH-SCRIPT2 with Windows 95/98/Me

For operation under Windows 95/98/Me, you should install both the Windows
95/98/Me PostScript printer driver and the PPD file.
This documentation describes the specific printer functions and menus that are
added by installing the PPD file. For details about the functions and menus of
the Windows 95/98/Me PostScript printer driver, see the printer driver's Help.
Note
❒ Be sure to install the PPD file for Windows 95/98/Me. Do not install the PPD
file for Windows 2000 or Windows NT 4.0 accidentally.

Printer Properties Tabs and Their Settings

This section describes the Printer Properties tabs and the settings that are specif-
ic to this printer. The [General], [Details], [Sharing], and [Color Management] tabs are
standard Windows tabs.
Reference
For more information about these tabs, see the documentation that comes
with your Windows operating system.
[Paper] tab
❖ ❖ ❖ ❖ Paper size
Use this to select the size of paper you want to use.
Reference
For more information about the paper sizes supported by this printer, see
P.32 "Specifications".
❖ ❖ ❖ ❖ Paper source
Use this to select the paper tray you want to use. The following items are
available: [AutoSelect Tray], [Tray 1], and [Tray 2] (option).
Note
❒ If the paper tray you want to use is not available here even though it is
physically installed, use the [Device Options] tab to make the printer recog-
nize the tray correctly. ⇒ P.4 "[Device Options] tab"
Windows
1