Configuring Windows 95/98; Printing Without Using A Print Server; Printing With A Windows 2000 Or Windows Nt Print Server - Ricoh AFICIO AP306 Setup Manual

Configuring Windows 95/98

Printing Without Using a Print Server

The following procedure describes how to configure Windows 95/98 to use the
printer on a network without a Windows 2000, Windows NT Server, Windows
NT Workstation, or NetWare based print server.
indicates topics explained in this document
1. Decide on the protocol to use
Consult your network administrator about which of the three protocols are appropriate.
TCP/IP
2. Configure the chosen protocol
"Configuring TCP/IP and IPP for Printing"
3. Select the appropriate software
If using TCP/IP ...
PortNavi
4. Install the software and set the printer driver port
"Using PortNavi"

Printing with a Windows 2000 or Windows NT Print Server

See P.13 "Setting up a Client Computer" for how to configure Windows 95/98
with a Windows 2000 or Windows NT print server.
1. Windows 95/98
Configuration
IPP
I f u s i n g I P P o r N e tB E U I . . .
Multidirect Print
"Using Multidirect Print"
NetBEUI
"Configuring NetBEUI
for Printing"
Draft 2000/06/22
1