Table of Contents
Advertisement
Remarks
Replacing the Fuser Oil Unit
R WARNING:
• Do not incinerate spilled toner
or used toner. Toner dust
might ignite when exposed to
an open flame.
R CAUTION:
• The inside of the machine be-
comes very hot. Do not touch the
parts with a label indicating a "hot
surface". Otherwise, an injury
might occur.
• Keep toner (used or unused) and
the toner cartridge out of reach of
children.
• The fusing unit becomes very
hot. When installing a new fuser
6
oil unit, turn off the machine and
wait about an hour. After that, in-
stall the new fuser oil unit. Not
waiting for the unit to cool could
result in a burn.
• Keep the fuser oil unit away from
flames. There is a risk of fire or
burns.
If the message "
placement.
", and "
ty.
Oil Unit.
place it on your own by following the
procedure below or call your service
representative.
Note
❒ Service differ depending on the
maintenance service contract.
A A A A
Turn off the power, and then un-
plug the power cable.
Important
❒ Be sure to wait about an hour to
avoid burns.
144
Fuser Oil Unit Re-
", "
Fusing oil is emp-
Please replace Fuser
" are displayed, either re-
B B B B
If the finisher is installed, detach
it from the machine.
C C C C
Open the duplex reversal unit.
D D D D
Slowly pull out the left cover.
E E E E
Open the upper left cover.
AAE022S
AAE023S
AAE024S
Advertisement
Table of Contents
