Replacing The Fuser Cleaning Web - Ricoh DDP 70e User Manual

Replacing the Fuser Cleaning Web

To remove the Fuser Unit:
1. Open the Front Cover of the printer.
WARNING!
The Fuser Unit is very hot. Do not touch any parts of the Fuser Unit
except those parts which are used to replace the Fuser Cleaning Web.
Do Not open the Fuser Unit and Tray 1 at the same time. The printer may
tip over causing personal injury or damage to the printer.
2. Hold up the Fuser Latch and pull out the Fuser Unit.
Fuser Unit
Fuser Latch
Care and Maintenance 4-15