Configuring A Terminal Server - Nortel 1000 Installation And Commissioning Manual

Configuring a Terminal Server

Connecting an IR-8020M-101 Terminal Server
This chapter contains the following procedures:
• Procedure 52: "Connecting a Terminal Server to the system"
on page 254
• Procedure 53: "Configure IP address for the Terminal Server"
on page 255
• Procedure 54: "Run telnet from PC" on
• Procedure 55: "Accessing a CS 1000E from a PC through telnet
Terminal Server" on
• Procedure 56: "Configuring a transparent rlogin port" on
• Procedure 58: "Accessing an MRV Console Port through the
on-board modem" on
Follow Procedure 52 to connect a Terminal Server with a CS 1000E system.
Table 16 lists the MRV cables required to install the IR-8020M-101 Terminal
Server in a CS 1000E system.
Table 16
Required MRV serial cables and connectors
Order Code
NTDU6302
NTDU6303
P/N-151-3028
P/N-350-0308
Communication Server 1000E
page 256
page 257
page 262
Description
Connects MRV Terminal Server to any
standard DTE port or DCE port when a Null
modem is used
Used for telnet, rlogin connections
Male RJ-45 to Male RJ-45 with connectors,
10 feet
Female RJ-45 to Female DB9
Page 253 of 466
page 258
Installation and Commissioning