Show Dot1X Users - Cisco SPS2024 Reference Manual

802.1x Commands

show dot1x users

show dot1x users
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Field
Termination Cause
State
Authentication
success
Authentication
fails
The show dot1x users Privileged EXEC mode command displays active 802. 1 x
authenticated users for the device.
Syntax
show dot1x users [username
Parameters
•
username —
Supplicant username (Range: 1-160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Description
The reason for the session termination.
The current value of the Authenticator PAE state
machine and of the Backend state machine.
The number of times the state machine received a
Success message from the Authentication Server.
The number of times the state machine received a
Failure message from the Authentication Server.
username ]
36
531