Cisco SPS2024 Reference Manual page 206

IGMP Snooping Commands
show ip igmp snooping groups
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Parameters
•
vlan-id —
Specifies the VLAN number
•
ip-multicast-address
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
To see the full Multicast Address Table (including static addresses) use the show
bridge multicast address-table Privileged EXEC command.
Example
The following example shows IGMP snooping information on Multicast groups.
Console# show ip igmp snooping groups
Vlan Group
Address
1 231.2.2.3
1 231.2.2.3
19 231.2.2.8
19 231.2.2.8
IGMP Reporters that are forbidden statically:
Vlan Group Address
---- -------------
1 231.2.2.3
19 231.2.2.8
— Specifies the IP Multicast address
Source
Address
172.16.1.1
172.16.1.2
172.16.1.1
172.16.1.2
Source address
--------------
172.16.1.1
172.16.1.1
14
Include
Ports
e1
e2
e9
e10-e11
Ports
--------
e8
e8
204