Terminal History Size - Cisco SPS2024 Reference Manual

User Interface Commands

terminal history size

terminal history size
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Console> terminal no history
The terminal history size User EXEC mode command configures the command
history buffer size for the current terminal session. Use the no form of this
command to reset the command history buffer size to the default setting.
Syntax
number-of-commands
terminal history size
terminal no history size
Parameters
•
number-of-commands
may record in its command history buffer. (Range: 10-206)
Default Configuration
The default command history buffer size is 10.
Command Mode
User EXEC mode
User Guidelines
The terminal history size user EXEC command configures the size of the command
history buffer for the current terminal session. To change the default size of the
command history buffer, use the history line configuration command.
The maximum number of commands in all buffers is 256.
— Specifies the number of commands the system
33
471