Ip Domain-Name - Cisco SPS2024 Reference Manual

Cisco systems ethernet switch reference guide
Hide thumbs Also See for SPS2024:
Table of Contents

Advertisement

IP Address Commands

ip domain-name

ip domain-name
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The ip domain-name Global Configuration mode command defines a default
domain name used by the software to complete unqualified host names (names
without a dotted-decimal domain name). Use the no form of this command to
remove the default domain name.
Syntax
name
ip domain-name
no ip domain-name
Parameters
name
— Specifies the default domain name used to complete unqualified
host names. Do not include the initial period that separates an unqualified
name from the domain name. (Range: 1-158 characters)
Default Configuration
A default domain name is not defined.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example defines default domain name www.LinkSys.com.
Console(config)# ip domain-name www.LinkSys.com
15
219

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sps224g4Sps208g

Table of Contents