Show Ip Igmp Snooping Mrouter - Cisco SPS2024 Reference Manual

IGMP Snooping Commands

show ip igmp snooping mrouter

show ip igmp snooping mrouter
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Command Mode
Global configuration
Command Usage
Use this command to associate CPE VLAN to a Multicast-TV VLAN.
If an IGMP message is received on a customer port tagged with a CPE VLAN, and
there is a mapping from that CPE VLAN to a Multicast-TV VLAN, the IGMP
message is associated with the Multicast-TV VLAN.
Example
The following example maps an internal CPE VLAN number 4 to the Multicast TV
VLAN number 300.
Console (config)# ip igmp snooping map cpe vlan 4 multicast-tv
vlan 300
The show ip igmp snooping mrouter Privileged EXEC mode command displays
information on dynamically learned Multicast device interfaces.
Syntax
show ip igmp snooping mrouter [interface
Parameters
•
vlan-id
— Specifies the VLAN number.
Default Configuration
This command has no default configuration.
vlan-id
]
14
201