Show Bridge Address-Table Static - Cisco SPS2024 Reference Manual

Address Table Commands

show bridge address-table static

show bridge address-table static
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Command Mode
Privileged EXEC mode
User Guidelines
Internal usage VLANs (VLANs that are automatically allocated on ports with a
defined Layer 3 interface) are presented in the VLAN column by a port number
and not by a VLAN ID.
"Special" MAC addresses that were not statically defined or dynamically learned
are displayed in the MAC address table. This includes, for example, MAC
addresses defined in ACLs.
Example
In this example, all classes of entries in the bridge-forwarding database are
displayed
Console# show bridge address-table
Aging time is 300 secs
interface mac address
-------------------------
1 00:60:70:4C:73:FF
1 00:60:70:8C:73:FF
200 00:10:0D:48:37:FF
The show bridge address-table static Privileged EXEC mode command displays
statically created entries in the bridge-forwarding database.
Syntax
show bridge address-table static [vlan vlan] [ethernet interface
| port-channel port-channel-number]
Port Type
---- -------
e8 dynamic
e8 dynamic
e9 static
5
89