Cisco SPS2024 Reference Manual page 294

QoS Commands
show qos interface
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
If no keyword is specified, port QoS mode (for example., DSCP trusted, CoS
trusted, untrusted), default CoS value, DSCP-to-DSCP-mutation map attached to
the port, and policy map attached to the interface are displayed.
If no interface is specified, QoS information about all interfaces is displayed.
Example
The following example displays the buffer settings for queues on Ethernet port e1.
Console# show qos interface ethernet e1 buffers
Ethernet e1
Notify Q Depth
qid Size
1 125
2 125
3 125
4 125
5 125
6 125
7 125
8 125
23
292