Copying And Pasting Text - Cisco SPS2024 Reference Manual

Introduction
Editing Features
NOTE
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Convention
press key
Ctrl+F4
Screen Display
all

Copying and Pasting Text

Up to 1000 lines of text (or commands) can be copied and pasted into the device.
It is the user's responsibility to ensure that the text copied into the device consists
of legal commands only.
This feature is dependent on the baud rate of the device.
When copying and pasting commands from a configuration file, make sure that the
following conditions exist:
•
A device Configuration mode has been accessed.
•
The commands contain no encrypted data, like encrypted passwords or
keys. Encrypted data cannot be copied and pasted into the device.
Description
Names of keys to be pressed are shown in bold.
Keys separated by the + character are to be
pressed simultaneously on the keyboard
Fixed-width font indicates CLI prompts, CLI
commands entered by the user, and system
messages displayed on the console.
When a parameter is required to define a range of
ports or parameters and all is an option, the
default for the command is all when no parameters
are defined. For example, the command interface
range port-channel has the option of either
entering a range of channels, or selecting all.
When the command is entered without a
parameter, it automatically defaults to all.
1
32