Cisco SPS2024 Reference Manual page 55

ACL Commands
deny (IP)
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Syntax
deny [disable-port] {any |
destination destination-wildcard
{
precedence
]
deny-icmp [disable-port] {any | {
destination-wildcard
number
precedence ]
deny-igmp [disable-port] {any | {
destination-wildcard
deny-tcp [disable-port] {any | {
{ destination destination-wildcard
number
precedence ] [flags
eny-udp [disable-port] {any | {
{ destination destination-wildcard
number
precedence ]
Parameters
•
disable-port — Specifies that the port is disabled.
•
source
— Specifies the IP address or host name from which the packet was
sent. Specify any to indicate IP address 0.0.0.0 and mask 255.255.255.255.
•
source-wildcard
placing 1's in bit positions to be ignored. Specify any to indicate IP address
0.0.0.0 and mask 255.255.255.255.
•
destination
— Specifies the IP address or host name to which the packet is
being sent. Specify any to indicate IP address 0.0.0.0 and mask
255.255.255.255.
•
destination-wildcard
by placing 1's in bit positions to be ignored. Specify any to indicate IP
address 0.0.0.0 and mask 255.255.255.255.
protocol source source-wildcard
} {any | {
dscp number
}} [dscp
source source-wildcard
icmp-type
}} {ny | } {any |
source source-wildcard
igmp-type
}} {any | } [dscp
source source-wildcard
}} {any | destination-port
list-of-flags
]
source source-wildcard
}} {any | destination-port
— (Optional for the first type) Specifies wildcard bits by
— (Optional for the first type) Specifies wildcard bits
| ip-precedence
destination
}} {any | {
icmp-code number
} [dscp
destination
}} {any | {
number
| ip-precedence
source-port
}} {any |
} [dscp number
source-port
}} {any |
} [dscp number
3
}} {ny |
ip-
| ip-
number
]
} {any |
| ip-
} {any |
| ip-
53