Spanning Tree Commands
exit (mst)
exit (mst)
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
The following example displays a pending MST region configuration.
Console(config-mst)# show pending
Pending MST configuration
Name: Region1
Revision: 1
Instance VLANs Mapped
0
1-9,21-4094
1
10-20
The exit MST Configuration mode command exits the MST Configuration mode,
and applies all configuration changes.
Syntax
exit
Default Configuration
This command has no default configuration.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
State
Enabled
Enabled
28
390