Show Qos Map - Cisco SPS2024 Reference Manual

QoS Commands

show qos map

show qos map
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Parameters
•
in-dscp
— Specifies up to 8 DSCP values separated by spaces. (Range: 0-
63)
•
out-dscp
— Specifies up to 8 DSCP values separated by spaces. (Range:
0-63)
Default Configuration
The default map is the Null map, which means that each incoming DSCP value is
mapped to the same DSCP value.
Command Mode
Global Configuration mode.
User Guidelines
This is the only map that is not globally configured. it is possible to have several
maps and assign each one to different ports.
Example
The following example changes DSCP values 1, 2, 4, 5 and 6 to DSCP Mutation
Map value 63.
Console(config)# qos map dscp-mutation 1 2 4 5 6 to 63
The show qos map Global Configuration mode command displays the QoS
mapping information.
Syntax
show qos map [dscp-queue | dscp-dp | policed-dscp | dscp-mutation
23
303