Chapter 23: Qos Commands; Qos - Cisco SPS2024 Reference Manual

QoS Commands

qos

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The qos Global Configuration mode command enables quality of service (QoS) on
the device. Use the no form of this command to disable QoS on the device.
Syntax
qos [basic | advanced]
no qos
Parameters
•
basic — QoS basic mode.
•
advanced — QoS advanced mode, which enables the full range of QoS
configuration.
Default Configuration
The QoS basic mode is enabled.
Command Mode
Global Configuration mode
User Guidelines
In advanced mode the VPT of the frame might be changed to egress_queue*2.
23
268