Logging Buffered Size - Cisco SPS2024 Reference Manual

Cisco systems ethernet switch reference guide
Hide thumbs Also See for SPS2024:
Table of Contents

Advertisement

Syslog Commands

logging buffered size

logging buffered size
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Default Configuration
The default severity level is informational.
Command Mode
Global Configuration mode
User Guidelines
All the syslog messages are logged to the internal buffer. This command limits the
messages displayed to the user.
Example
The following example limits syslog messages displayed from an internal buffer
based on severity level debugging.
Console(config)# logging buffered debugging
The logging buffered size Global Configuration mode command changes the
number of syslog messages stored in the internal buffer. Use the no form of this
command to restore the default configuration.
Syntax
logging buffered size
no logging buffered size
Parameters
number
— Specifies the maximum number of messages stored in the
history table. (Range: 1 - 400)
number
30
424

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sps224g4Sps208g

Table of Contents