Show Management Access-Class - Cisco SPS2024 Reference Manual

Management ACL Commands

show management access-class

show management access-class
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The show management access-class Privileged EXEC mode command displays
the active management access list.
Syntax
show management access-class
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays information about the active management access
list.
Console# show management access-class
Management access-class is enabled, using access list mlist
19
253