Lacp Port-Priority - Cisco SPS2024 Reference Manual

LACP Commands

lacp port-priority

lacp port-priority
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
The following example configures the system priority to 120.
Console(config)# lacp system-priority 120
The lacp port-priority Interface Configuration (Ethernet) mode command
configures physical port priority. Use the no form of this command to return to the
default configuration.
Syntax
value
lacp port-priority
no lacp port-priority
Parameters
•
value — Specifies port priority. (Range: 1-65535)
Default Configuration
The default port priority is 1.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no user guidelines for this command.
17
236