Show Ip Arp Inspection - Cisco SPS2024 Reference Manual

ARP Inspection Commands

show ip arp inspection

show ip arp inspection
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
The following example configures the minimal interval between successive ARP
SYSLOG messages.
Console(config)# ip arp inspection logging interval
The show ip arp inspection EXEC mode command displays the ARP inspection
configuration.
Syntax
show ip arp inspection [ethernet
Parameters
•
interface —
Specifies an Ethernet port.
•
port-channel-number —
Default Configuration
This command has no default configuration.
Command Mode
EXEC
User Guidelines
There are no user guidelines for this command.
interface
| port-channel
Specifies a port-channel number.
4
port-channel-number
]
72