Interface Range Vlan - Cisco SPS2024 Reference Manual

VLAN Commands

interface range vlan

interface range vlan
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
The following example configures VLAN 1 with IP address 131. 1 08. 1 .27.
Console(config)# interface vlan 1
Console(config-if)# ip address 131.108.1.27
The interface range vlan Global Configuration mode command enables
simultaneously configuring multiple VLANs.
Syntax
interface range vlan {
Parameters
•
vlan-range
— Specifies a list of VLAN IDs to be added. Separate
nonconsecutive VLAN IDs with a comma and no spaces; a hyphen
designates a range of IDs. (Range: 2-4094)
•
all — All existing static VLANs.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Commands under the interface range context are executed independently on
each interface in the range. If the command returns an error on one of the
interfaces, an error message is displayed and execution of the command
continues on the other interfaces.
vlan-range | all}
34
484