Show Rmon Log - Cisco SPS2024 Reference Manual

RMON Commands

show rmon log

show rmon log
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The following table describes significant fields shown in the example:
Field
Index
Description
Type
Community
Owner
Last Time Sent
The show rmon log Privileged EXEC mode command displays the RMON log table.
Syntax
event
show rmon log [
Parameters
•
event
— Specifies the event index. (Range: 0-65535)
Default Configuration
This command has no default configuration.
Description
An index that uniquely identifies the event.
A comment describing this event.
The type of notification that the device generates
about this event. Can have the following values:
none, log, trap, log-trap. In the case of log, an entry
is made in the log table for each event. In the case
of trap, an SNMP trap is sent to one or more
management stations.
If an SNMP trap is to be sent, it is sent to the SNMP
community specified by this octet string.
The entity that configured this event.
The time this entry last generated an event. If this
entry has not generated any events, this value is
zero.
]
25
331