Ip Dhcp Snooping Vlan - Cisco SPS2024 Reference Manual

DHCP Commands

ip dhcp snooping vlan

ip dhcp snooping vlan
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The ip dhcp snooping vlan Global Configuration mode command enables DHCP
snooping on a VLAN. Use the no form of this command to disable DHCP snooping
on a VLAN.
Syntax
ip dhcp snooping vlan
no ip dhcp snooping
Parameters
•
vlan-id
— Specifies the VLAN ID.
Default Configuration
The default configuration is set to disabled.
Command Mode
Global Configuration mode
User Guidelines
DHCP snooping must first be globally enable before enabling DHCP snooping on a
VLAN.
Example
The following example enables DHCP snooping on a VLAN.
Console(config)# ip dhcp snooping vlan
vlan-id
vlan-id
8
130