Show Ip Igmp Snooping Groups - Cisco SPS2024 Reference Manual

IGMP Snooping Commands

show ip igmp snooping groups

show ip igmp snooping groups
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays IGMP snooping information on VLAN 1000.
Console # show ip igmp snooping interface 1000
IGMP Snooping is globally enabled
IIGMP snooping is enabled on VLAN 1000
IGMP snooping querier admin: Enabled
IGMP snooping querier oper: Enabled
IGMP host timeout is 300 sec
IGMP Immediate leave is disabled
IGMP leave timeout is 10 sec
IGMP mrouter timeout is 300 sec
The show ip igmp snooping groups Privileged EXEC mode command displays
Multicast groups learned by IGMP snooping.
Syntax
show ip igmp snooping groups [vlan
vlan-id ip-multicast-address
] [address
14
]
203