Show Interfaces Configuration - Cisco SPS2024 Reference Manual

Ethernet Configuration Commands

show interfaces configuration

show interfaces configuration
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
The following example reactivates interface 1.
Console# set interface active ethernet 1
The show interfaces configuration Privileged EXEC mode command displays the
configuration for all configured interfaces.
Syntax
show interfaces configuration [ethernet
number
]
Parameters
•
interface
— Valid Ethernet port.
•
port-channel-number
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
interface
— Valid port-channel number.
port-channel-
| port-channel
12
166