Ip Dhcp Snooping Binding - Cisco SPS2024 Reference Manual

DHCP Commands

ip dhcp snooping binding

ip dhcp snooping binding
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The ip dhcp snooping binding Privileged EXEC mode command configures the
DHCP snooping binding database and adds binding entries to the database. Use
the no form of this command to delete entries from the binding database.
Syntax
ip dhcp snooping binding
port-channel-number
port-channel
no ip dhcp snooping binding
Parameters
•
mac-address — Specifies a MAC address.
•
vlan-id
— Specifies a VLAN number.
•
ip-address
— Specifies an IP address.
•
interface — Specifies an Ethernet port.
•
port-channel-number —
•
seconds
expiry
binding entry is no longer valid. (Range: 10 – 4294967295)
Default Configuration
No static binding exists.
Command Mode
Privileged EXEC mode
User Guidelines
After entering this command an entry is added to the DHCP snooping database. If
DHCP snooping binding file exists, the entry is added to that file also.
The entry is displayed in the show commands as a "DHCP Snooping entry".
mac-address vlan-id ip-address
seconds
} xpiry
mac-address vlan-id
Specifies the Port-channel number.
— Specifies the interval, in seconds, after which the
8
interface
{ethernet |
136