Sntp Client Poll Timer - Cisco SPS2024 Reference Manual

Clock Commands

sntp client poll timer

sntp client poll timer
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
If there is at least 1 trusted key, then unauthenticated messages will be ignored.
Example
The following example authenticates key 8.
Console(config)# sntp authentication-key 8 md5 ClkKey
Console(config)# sntp trusted-key 8
The sntp client poll timer Global Configuration mode command sets the polling
time for the Simple Network Time Protocol (SNTP) client. Use the no form of this
command to restore default configuration.
Syntax
sntp client poll timer
no sntp client poll timer
Parameters
•
seconds
— Polling interval in seconds. (Range: 60-86400)
Default Configuration
Polling interval is 1024 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
seconds
6
109