Show Ip Dhcp Relay - Cisco SPS2024 Reference Manual

DHCP Relay Commands

show ip dhcp relay

show ip dhcp relay
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The show ip dhcp relay Privileged EXEC mode command displays the defined
DHCP relay server addresses available for DHCP relay.
Syntax
show ip dhcp relay
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command is only functional if the device is in Router mode.
Example
The following example displays DHCP relay server addresses.
Console# show ip dhcp relay
DHCP relay is enabled.
Servers: 172.16.1.11, 172.16.8.11
9
144