Show Bridge Address-Table Count - Cisco SPS2024 Reference Manual

Address Table Commands

show bridge address-table count

show bridge address-table count
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The show bridge address-table count Privileged EXEC mode command displays
the number of addresses present in the Forwarding Database.
Syntax
show bridge address-table count [vlan
port-channel-number
channel
Parameters
•
vlan —
Specifies a valid VLAN, such as VLAN 1.
•
interface —
A valid Ethernet port.
•
port-channel-number —
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, the number of addresses present in all VLANs are displayed.
Console# show bridge address-table count
Capacity: 8192
Free: 8083
Used: 109
vlan ] [Ethernet
]
A valid port-channel number.
interface-number | port-
5
91