Rmon Table-Size - Cisco SPS2024 Reference Manual

RMON Commands

rmon table-size

rmon table-size
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The rmon table-size Global Configuration mode command configures the
maximum size of RMON tables. Use the no form of this command to return to the
default configuration.
Syntax
rmon table-size {history
no rmon table-size {history | log}
Parameters
•
entries
history
32767)
•
entries
log — Maximum number of log table entries. (Range: 20-32767)
Default Configuration
History table size is 270.
Log table size is 200.
Command Mode
Global Configuration mode
User Guidelines
The configured table size takes effect after the device is rebooted.
Example
The following example configures the maximum RMON history table sizes to 100
entries.
Console(config)# rmon table-size history 100
entries entries
| log
— Maximum number of history table entries. (Range: 20 -
}
25
333