Qos Aggregate-Policer - Cisco SPS2024 Reference Manual

QoS Commands

qos aggregate-policer

qos aggregate-policer
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Default Configuration
This command has no default configuration.
Command Mode
Policy-map Class Configuration mode
User Guidelines
Policing uses a token bucket algorithm. CIR represents the speed with which the
token is removed from the bucket. CBS represents the depth of the bucket.
Example
The following example defines a policer for classified traffic. When the traffic rate
exceeds 124,000 bps or the normal burst size exceeds 96000 bps, the packet is
dropped. The class is called 'class1' and is in a policy map called 'policy1'.
Console (config)# policy-map policy1
Console (config-pmap)# class class1
Console (config-pmap-c)# police 124000 9600 exceed-action drop
The qos aggregate-policer Global Configuration mode command defines the
policer parameters that can be applied to multiple traffic classes within the same
policy map. Use the no form of this command to remove an existing aggregate
policer.
Syntax
qos aggregate-policer
burst-byte
exceed-action {drop | policed-dscp-transmit} [dscp
no qos aggregate-policer
aggregate-policer-name committed-rate-bps excess-
23
dscp
]
281