QoS Commands
show qos interface
show qos interface
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
The following example limits the rate of the incoming traffic.
Console(config)# interface ethernet e5
Console(config-if) rate-limit
The show qos interface Privileged EXEC mode command displays Quality of
Service (QoS) information on the interface.
Syntax
show qos interface [buffers | queuing | policers | shapers | rate-limit] [Ethernet
interface-number
| vlan
Parameters
•
interface-number —
ethernet
•
vlan-id
lan
— VLAN number.
•
number —
port-channel
•
buffers — Displays buffer setting for the interface's queues. For gigabit
Ethernet displays, the queue depth for each of the 8 queues and the
thresholds for the WRED/Tail Drop. For 10/100 displays the minimum
reserved setting.
•
queuing — Displays the queue's strategy (WRR or EF) and the weight for
WRR queues and the CoS to queue map and the EF priority.
•
policers — Displays all the policers configured for this interface, their
setting, and the number of policers currently unused.
•
shapers — Displays the shaper of the specified interface and the shaper for
the queue on the specified interface.
•
rate-limit — Displays the rate-limit configuration.
vlan-id
| port-channel
Valid Ethernet port number.
Valid port-channel number.
number
]
23
291