Ip Source-Guard (Interface) - Cisco SPS2024 Reference Manual

Cisco systems ethernet switch reference guide
Hide thumbs Also See for SPS2024:
Table of Contents

Advertisement

IP Source Guard Commands

ip source-guard (interface)

ip source-guard (interface)
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The ip source-guard Interface Configuration (Ethernet, Port-channel) mode
command enables IP source guard on an interface. Use the no form of this
command to disable IP source guard.
Syntax
ip source-guard
no ip source-guard
Default Configuration
IP source guard is disabled.
Command Mode
Interface Configuration (Ethernet, Port-channel) mode
User Guidelines
IP source guard must first be globally enabled before enabling IP source guard on
an interface.
IP source guard is effective only on DHCP snooping untrusted interface, although it
can be enabled (as a shadow configuration) on a trusted interface.
Example
The following example enables IP source guard on an interface.
Console(config)# interface ethernet 1
Console(config-if)# ip source-guard
16
227

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sps224g4Sps208g

Table of Contents