Cisco SPS2024 Reference Manual page 170

Ethernet Configuration Commands
show interfaces status
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the status of all configured interfaces.
Console# show interfaces status
Port Type
---- ----------
1 100M-Copper --
2 100M-Copper --
3 100M-Copper --
4 100M-Copper --
5 100M-Copper Full
6 100M-Copper --
7 100M-Copper --
8 100M-Copper --
9 100M-Copper --
10 100M-Copper --
11 100M-Copper --
12 100M-Copper --
Duplex Speed Neg
----------- ------- ---- ----- -------- ----
-- --
-- --
-- --
-- --
100 Enabled --
-- --
-- --
-- --
-- --
-- --
-- --
-- --
Flow Link Back
Ctrl State Pressure Mode
-- Down --
-- Down --
-- Down --
-- Down --
Up Disabled Auto
-- Down --
-- Down --
-- Down --
-- Down --
-- Down --
-- Down --
-- Down --
12
Mdix
--
--
--
--
--
--
--
--
--
--
--
168