Cisco SPS2024 Reference Manual page 234

IP Source Guard Commands
show ip source-guard status
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Parameters
•
mac-address—
•
ip-address—
Specifies an IP address.
•
vlan-id—
Specifies a VLAN number.
•
interface—
Specifies an Ethernet port.
•
port-channel-number—
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example.
Console# show ip source-guard status
IP source guard is globally disabled.
Console# show ip source-guard status
Interface Filter Status
--------- ------ ------
e21 IP
e22 IP
e23 IP
e24 IP
e32 IP
e33 IP
e34 IP
e35 IP
Specifies a MAC address.
Specifies a Port-channel number.
IP Address Mac Address
---------
Active 10.1.8.1
Active 10.1.8.2
Active 10.1.12.2
Active Deny all
Active 10.1.8.218 0060.704C.7BAC 3
Inactive 10.1.8.32
Inactive
Inactive
VLAN Type
-------------- ---- ------
0060.704C.73FF 3
0060.704C.7BC1 3
0060.704C.7BC3 4
0060.704C.83FF 3
16
DHCP
DHCP
DHCP
Static
DHCP
232