Cisco SPS2024 Reference Manual page 175

Ethernet Configuration Commands
show interfaces counters
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The following example displays counters for Ethernet port e1.
Console# show interfaces counters ethernet e1
Port InOctets
---------------- -----------
e1 183892
Port OutOctets OutUcastPkts OutMcastPkts OutBcastPkts
---------------- -----------
e1 9188
FCS Errors0
Single Collision Frames0
Late Collisions0
Oversize Packets0
Internal MAC Rx Errors0
Received Pause Frames0
Transmitted Pause Frames0
The following table describes the fields shown in the display.
Field
InOctets
InUcastPkts
InMcastPkts
InBcastPkts
OutOctets
OutUcastPkts
OutMcastPkts
OutBcastPkts
FCS Errors
InUcastPkts InMcastPkts
-----------
0 0
------------ ------------
0 0
Description
Counted received octets.
Counted received Unicast packets.
Counted received Multicast packets.
Counted received Broadcast packets.
Counted transmitted octets.
Counted transmitted Unicast packets.
Counted transmitted Multicast packets.
Counted transmitted Broadcast packets.
Counted received frames that are an integral
number of octets in length but do not pass the
FCS check.
12
InMcastPkts
-----------
0
0
173