Chapter 4: Arp Inspection Commands; Ip Arp Inspection - Cisco SPS2024 Reference Manual

ARP Inspection Commands

ip arp inspection

SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The ip arp inspection Global Configuration mode command globally enables ARP
inspection. To disable ARP inspection, use the no form of this command.
Syntax
ip arp inspection
no ip arp inspection
Default Configuration
The default configuration is set to disabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example globally enables ARP inspection.
Console(config)# ip arp inspection
4
64