IP Source Guard Commands
show ip source-guard status
show ip source-guard status
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the IP source guard configuration.
Console# show ip source-guard configuration
IP source guard is globally enabled
Interface
State
------------ --------------
e21
Enabled
e22
Enabled
e23
Enabled
e24
Enabled
e32
Enabled
e33
Enabled
e34
Enabled
The show ip source-guard status Privileged EXEC mode command displays the IP
source guard status.
Syntax
show ip source-guard status [mac-address
vlan-id
[vlan
] [ethernet
port-channel-number
port-channel
interface
|
]
mac-address
] [ip-address
16
ip-address
]
231