Cisco SPS2024 Reference Manual page 125

Configuration and Image File Commands
copy
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Keyword
boot
tftp://
xmodem:
null:
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The location of a file system dictates the format of the source or destination URL.
The entire copying process may take several minutes and differs from protocol to
protocol and from network to network.
*.prv and *.sys files cannot be copied.
Understanding Invalid Combinations of Source and Destination — Some invalid
combinations of source and destination exist. Specifically, you cannot copy if one
of these conditions exists:
•
The source file and destination file are the same file.
•
xmodem: is the destination file. The source file can be copied to image,
boot and null: only.
•
tftp:// is the source file and destination file on the same copy.
Source or Destination
Boot file.
Source or destination URL for a TFTP
network server. The syntax for this alias is
//host/[directory]/filename
tftp:
be represented by its IP address or
hostname.
Source for the file from a serial connection
that uses the Xmodem protocol.
Null destination for copies or files. A remote
file can be copied to null to determine its
size.
. The host can
7
123