Spanning Tree Commands
spanning-tree mst priority
spanning-tree mst priority
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Parameters
•
interface
— A valid Ethernet port.
•
port-channel-number
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
This feature should be used only when working in RSTP or MSTP mode.
Example
The following example restarts the protocol migration process on Ethernet port
e11.
Console# clear spanning-tree detected-protocols ethernet e11
The spanning-tree mst priority Global Configuration mode command configures
the device priority for the specified spanning-tree instance. Use the no form of this
command to restore the default configuration.
Syntax
instance-id
spanning-tree mst
no spanning-tree mst
— A valid port-channel number.
priority
priority
instance-id
priority
28
380