Ethernet Configuration Commands
show ports jumbo-frame
show ports jumbo-frame
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Field
Single Collision
Frames
Late Collisions
Oversize Packets
Internal MAC Rx
Errors
Received Pause
Frames
Transmitted Pause
Frames
The show ports jumbo-frame Privileged EXEC mode command displays the
configuration of jumbo frames.
Syntax
show ports jumbo-frame
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Description
Counted frames that are involved in a single
collision, and are subsequently transmitted
successfully.
Number of times that a collision is detected later
than one slotTime into the transmission of a
packet.
Counted frames received that exceed the
maximum permitted frame size.
Counted frames for which reception fails due to an
internal MAC sublayer received error.
Counted MAC Control frames received with an
opcode indicating the PAUSE operation.
Counted MAC Control frames transmitted on this
interface with an opcode indicating the PAUSE
operation.
12
174