Ip Dhcp Snooping Database - Cisco SPS2024 Reference Manual

Cisco systems ethernet switch reference guide
Hide thumbs Also See for SPS2024:
Table of Contents

Advertisement

DHCP Commands

ip dhcp snooping database

ip dhcp snooping database
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
The ip dhcp snooping database Global Configuration mode command configures
the DHCP snooping binding file. Use the no form of this command to delete the
binding file.
Syntax
ip dhcp snooping database
no ip dhcp snooping database
Default Configuration
The URL is not defined.
Command Mode
Global Configuration mode
User Guidelines
To ensure that the lease time in the database is accurate and the Simple Network
Time Protocol (SNTP) is enabled and configured.
The switch writes binding changes to the binding file only when the switch system
clock is synchronized with SNTP.
Example
The following example configures the DHCP snooping binding file.
Console(config)# ip dhcp snooping database
8
134

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sps224g4Sps208g

Table of Contents