Cisco SPS2024 Reference Manual page 337

SNMP Commands
snmp-server community
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
•
type router — Specifies that SNMP requests for duplicate tables configure
the router tables. This is the default.
•
type oob — Specifies that SNMP requests for duplicate tables configure
the oob tables.
Default Configuration
No communities are defined.
Command Mode
Global Configuration mode
User Guidelines
The view-name parameter cannot be specified for su, which has access to the
whole MIB.
The view-name parameter can be used to restrict the access rights of a
community string. When it is specified:
An internal security name is generated.
The internal security name for SNMPv1 and SNMPv2 security models is mapped
to an internal group name.
The internal group name for SNMPv1 and SNMPv2 security models is mapped to
a view-name (read-view and notify-view always, and for rw for write-view also)
The group-name parameter can also be used to restrict the access rights of a
community string. When it is specified:
An internal security name is generated.
The internal security name for SNMPv1 and SNMPv2 security models is mapped
to the group name.
26
335