Show Qos Interface - Cisco NCS 540 Series Routers Command Reference Manual

Congestion Management Commands

show qos interface

To display QoS information for a specific interface, use the show qos interface command in the XR EXEC
mode.
show qos interface interface-name {input|output}[location node-id]
Syntax Description
interface-name
input
output
location node-id
No default behavior or values
Command Default
XR EXEC mode
Command Modes
Command History
Release
Release 6.0
The show qos interface command displays configuration for all classes in the service policy that is attached
Usage Guidelines
to an interface.
Use this command to check the actual values programmed in the hardware from the action keywords in the
police rate command.
Task ID
Task
ID
qos
Examples
This is the sample output shows the QoS information on a interface hundredGigE 0/6/0/18
that are in the input direction:
RP/0/RP0/CPU0:router# show qos interface hundredGigE 0/6/0/18 input
Operations
read
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
Interface name. For more information about the
syntax for the router, use the question mark (?) online
help function.
Use the show interfaces command to see
Note
a list of all interfaces currently configured
on the router.
Attaches the specified policy map to the input
interface.
Attaches the specified policy map to the output
interface.
(Optional) Displays detailed QoS information for the
designated node. The node-id argument is entered
in the rack/slot/module notation.
Modification
This command was introduced.

show qos interface

49