User-Key - Cisco SPS2024 Reference Manual

SSH Commands

user-key

user-key
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
0ZCk0N/W9a/tnkm1shRE7Di71+w3fNiOA
6w9o44t6+AINEICBCCA4YcF6zMzaT1wefWwX6f+
Rmt5nhhqdAtN/4oJfce166DqVX1gWmN
zNR4DYDvSzg0lDnwCAC8Qh
Fingerprint: a4:16:46:23:5a:8d:1d:b5:37:59:eb:44:13:b9:33:e9
The user-key SSH Public Key-string Configuration mode command specifies
which SSH public key is manually configured. Use the no form of this command to
remove an SSH public key.
Syntax
username
user-key {rsa | dsa}
username
no user-key
Parameters
•
username
— Specifies the username of the remote SSH client. (Range: 1-48
characters)
•
rsa — Indicates the RSA key pair.
•
dsa — Indicates the DSA key pair.
Default Configuration
No SSH public keys exist.
Command Mode
SSH Public Key-string Configuration mode
29
407