Interface Vlan - Cisco SPS2024 Reference Manual

VLAN Commands

interface vlan

interface vlan
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Example
The following example defines the default VLAN.
Console(config-vlan)# default-vlan vlan
The interface vlan Global Configuration mode command enters the Interface
Configuration (VLAN) mode.
Syntax
vlan-id
interface vlan
Parameters
•
vlan-id
— Specifies an existing VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
In case the VLAN doesn't exist ('ghost VLAN') only partial list of the commands are
available under the interface VLAN context.
The commands that are supported for VLAN that do not exist are:
1. IGMP snooping control
2. Bridge Multicast configuration
34
483