Show Bridge Address-Table - Cisco SPS2024 Reference Manual

Address Table Commands

show bridge address-table

show bridge address-table
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
User Guidelines
There are no user guidelines for this command.
Example
In this example the port security max interface configuration command configures
the maximum addresses that can be learned on the port while the port is in port
security max-addresses mode.
Console(config)# interface ethernet e7
Console(config-if)# port security max max addr
The show bridge address-table Privileged EXEC mode command displays all
entries in the bridge-forwarding database.
Syntax
show bridge address-table [vlan
channel-number
| address
Parameters
•
vlan — Specifies a valid VLAN, such as VLAN 1.
•
interface —
A valid Ethernet port.
•
port-channel-number —
•
mac-address —
Default Configuration
This command has no default configuration.
vlan ] [ethernet
mac-address
]
A valid port-channel number.
A valid MAC address.
interface | port-channel
5
port-
88