Cisco SPS2024 Reference Manual page 359

SNMP Commands
show snmp groups
SPS208G/SPS224G4/SPS2024 Command Line Interface Reference Guide
Parameters
•
groupname—
Specifies the name of the group. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the configuration of views.
Console# show snmp groups
Name
-------------
user-group
managers-group
managers-group
The following table describes significant fields shown above.
Field
Name
Security Mode
Security Level
Security
Model Level Read
----- ----- ----
V3 priv Default
V3 priv Default
V3 priv Default
Description
Name of the group.
SNMP model in use (v1, v2 or v3).
Authentication of a packet with encryption.
Applicable only to SNMP v3 security.
26
Views
Write Notify
----- ------
""
""
"" ""
357